update to 2.3.57.1; switch to wxgtk-dev-314 package; remove start script

.SRCINFO

@@ -1,6 +1,6 @@
 pkgbase = superslicer-prerelease
 	pkgdesc = G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
-	pkgver = 2.3.57.0
+	pkgver = 2.3.57.1
 	pkgrel = 1
 	epoch = 1
 	url = https://github.com/supermerill/SuperSlicer
@@ -13,25 +13,23 @@ pkgbase = superslicer-prerelease
 	makedepends = libigl
 	makedepends = openvdb
 	makedepends = boost>=1.73.0
-	makedepends = wxgtk2-dev-opt
+	makedepends = wxgtk2-dev-314-opt
 	depends = cgal
 	depends = glew
 	depends = nlopt
 	depends = openvdb
-	depends = wxgtk3-dev-opt
+	depends = wxgtk3-dev-314-opt
 	depends = boost-libs>=1.73.0
 	depends = qhull>=2020.2-4
 	optdepends = superslicer-profiles: Predefined printer profiles
-	provides = superslicer=1:2.3.57.0
+	provides = superslicer=1:2.3.57.1
 	conflicts = superslicer
 	conflicts = superslicer-git
 	replaces = slic3r++
-	source = https://github.com/supermerill//SuperSlicer/archive/2.3.57.0.tar.gz
+	source = https://github.com/supermerill//SuperSlicer/archive/2.3.57.1.tar.gz
-	source = start-superslicer.sh
 	source = 0001-wxgtk3-is-broken-on-wayland.patch
 	source = https://raw.githubusercontent.com/archlinux/svntogit-community/1dea61c0b581ff5001d073689f68b0323740be93/trunk/prusa-slicer-openexr3.patch
-	sha512sums = f0b7284197526abacd45b8c5a026a20d6833b9f30a6c4b84c0f2db2332c2115c0ef261f6a03133c42c327346847e0a1d5fd546183478295258b71402d543ca14
+	sha512sums = 85f27864ec5c3c1b473ae4c9405b419b565246c9e4c0967f0adfbbe6c6baeb1c5c9a14c5d24883c12ff4b9b09faf88dfc590d034416a58696e1d38db3aec24be
-	sha512sums = db66bb6ddaf5882db26ea10e53c8ca648d94b898a333177c281c353d56e6f9ce75d91a4941ebdc5a9f1f627a986f5e70adbcd785a24d02fc9af58407e22ab926
 	sha512sums = acf35ebe467e9fb30f1b77d15348f1a7b82dcf45a5b829e375e972b5d6b49968603b3fa090c4d1f56e8b5148e2b820e79afa269da60ace70de1ceadcf6e820c5
 	sha512sums = c33c2414746bc9d7dceb5af59ecb4aed2189211fc3c8b144d712a39d3677ba4d366eb9b4dd05fbc3811954d69cd1273d714dc4536489fe153ac1aee2919e5c98
 

PKGBUILD

@@ -1,7 +1,7 @@
 # Maintainer: Lukas1818 aur at lukas1818 dot de
 
 pkgname=superslicer-prerelease
-pkgver=2.3.57.0
+pkgver=2.3.57.1
 _pkgtag=$pkgver
 pkgrel=1
 epoch=1
@@ -9,27 +9,25 @@ pkgdesc="G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)"
 arch=("$CARCH")
 url="https://github.com/supermerill/SuperSlicer"
 license=('AGPL3')
-depends=('cgal' 'glew' 'nlopt' 'openvdb' 'wxgtk3-dev-opt' 'boost-libs>=1.73.0' 'qhull>=2020.2-4')
+depends=('cgal' 'glew' 'nlopt' 'openvdb' 'wxgtk3-dev-314-opt' 'boost-libs>=1.73.0' 'qhull>=2020.2-4')
 replaces=('slic3r++')
-makedepends=('cereal' 'cmake' 'ninja' 'eigen' 'libigl' 'openvdb' 'boost>=1.73.0' 'wxgtk2-dev-opt') # cmake doesn't detect wx if not both gtk2 and gtk3 are installed
+makedepends=('cereal' 'cmake' 'ninja' 'eigen' 'libigl' 'openvdb' 'boost>=1.73.0' 'wxgtk2-dev-314-opt') # cmake doesn't detect wx if not both gtk2 and gtk3 are installed
 optdepends=('superslicer-profiles: Predefined printer profiles')
 provides=("superslicer=$epoch:$pkgver")
 conflicts=('superslicer' 'superslicer-git')
 source=("https://github.com/supermerill//SuperSlicer/archive/$_pkgtag.tar.gz"
-        "start-superslicer.sh"
         "0001-wxgtk3-is-broken-on-wayland.patch"
         "https://raw.githubusercontent.com/archlinux/svntogit-community/1dea61c0b581ff5001d073689f68b0323740be93/trunk/prusa-slicer-openexr3.patch")
-sha512sums=('f0b7284197526abacd45b8c5a026a20d6833b9f30a6c4b84c0f2db2332c2115c0ef261f6a03133c42c327346847e0a1d5fd546183478295258b71402d543ca14'
+sha512sums=('85f27864ec5c3c1b473ae4c9405b419b565246c9e4c0967f0adfbbe6c6baeb1c5c9a14c5d24883c12ff4b9b09faf88dfc590d034416a58696e1d38db3aec24be'
-            'db66bb6ddaf5882db26ea10e53c8ca648d94b898a333177c281c353d56e6f9ce75d91a4941ebdc5a9f1f627a986f5e70adbcd785a24d02fc9af58407e22ab926'
             'acf35ebe467e9fb30f1b77d15348f1a7b82dcf45a5b829e375e972b5d6b49968603b3fa090c4d1f56e8b5148e2b820e79afa269da60ace70de1ceadcf6e820c5'
             'c33c2414746bc9d7dceb5af59ecb4aed2189211fc3c8b144d712a39d3677ba4d366eb9b4dd05fbc3811954d69cd1273d714dc4536489fe153ac1aee2919e5c98')
 
 prepare()
 {
 	cd "$srcdir/SuperSlicer-$_pkgtag"
-  [ ! -f build/Makefile ] || rm -rf build
+	[ ! -f build/Makefile ] || rm -rf build
-  mkdir -p build
+	mkdir -p build
-  
+
 	# disabling tests is not enough, we need to remove them explicitly
 	sed -i 's,add_subdirectory(test),,g' src/CMakeLists.txt
 
@@ -44,7 +42,7 @@ build()
 	cd build
 
 	cmake .. \
-    -G Ninja \
+		-G Ninja \
 		-DCMAKE_BUILD_TYPE=Release \
 		-DCMAKE_INSTALL_PREFIX=/usr \
 		-DOpenGL_GL_PREFERENCE=GLVND \
@@ -54,8 +52,8 @@ build()
 		-DSLIC3R_GTK=3 \
 		-DSLIC3R_BUILD_TESTS=OFF \
 		-DSLIC3R_ALPHA=ON \
-		-DwxWidgets_CONFIG_EXECUTABLE=/opt/wxgtk-dev/bin/wx-config \
+		-DwxWidgets_CONFIG_EXECUTABLE=/opt/wxgtk-dev-314/bin/wx-config \
-    -DCMAKE_CXX_FLAGS="-Wl,-rpath=/opt/wxgtk-dev/lib"
+		-DCMAKE_CXX_FLAGS="-Wl,-rpath=/opt/wxgtk-dev-314/lib"
 
 	ninja
 }
@@ -66,7 +64,4 @@ package()
 
 	DESTDIR="$pkgdir" ninja install
 	test ! -h "$pkgdir/usr/share/SuperSlicer/resources" || rm "$pkgdir/usr/share/SuperSlicer/resources"
-
-	mv "$pkgdir/usr/bin/superslicer" "$pkgdir/usr/share/SuperSlicer"
-	install -Dm 755 "${srcdir}/start-superslicer.sh" "${pkgdir}/usr/bin/superslicer"
 }

start-superslicer.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-import_settings()
-{
-	if [ -d "$1" ] && [ ! -d "$HOME/.config/SuperSlicer-alpha" ]
-	then
-		echo "import data from $1 to the new data folder ~/.config/SuperSlicer-alpha"
-		cp -r "$HOME/.SuperSlicer" "$HOME/.config/SuperSlicer-alpha"
-	fi
-}
-
-import_settings "$HOME/.config/SuperSlicer"
-import_settings "$HOME/.SuperSlicer"
-
-/usr/share/SuperSlicer/superslicer "$@"