change superslicer-prerelease

.SRCINFO

@@ -1,7 +1,8 @@
-pkgbase = superslicer
+pkgbase = superslicer-prerelease
 	pkgdesc = G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
 	pkgver = 2.3.55.5
 	pkgrel = 3
+	epoch = 1
 	url = https://github.com/supermerill/SuperSlicer
 	arch = x86_64
 	license = AGPL3
@@ -18,6 +19,9 @@ pkgbase = superslicer
 	depends = wxgtk3-dev-opt
 	depends = boost>=1.73.0
 	depends = qhull>=2020.2-4
+	provides = superslicer=1:2.3.55.5
+	conflicts = superslicer
+	conflicts = superslicer-git
 	replaces = slic3r++
 	source = https://github.com/supermerill//SuperSlicer/archive/2.3.55.5.tar.gz
 	source = start-superslicer.sh
@@ -26,5 +30,5 @@ pkgbase = superslicer
 	sha512sums = 9a91e374b606447889ac517061fe559d7cbc7c6b2a79d521d46205b6ffdb8264e6fbcc09f62a6c6e462c1172b0ed08b1d4ddf839a3cc448ae1717888f1df287e
 	sha512sums = acf35ebe467e9fb30f1b77d15348f1a7b82dcf45a5b829e375e972b5d6b49968603b3fa090c4d1f56e8b5148e2b820e79afa269da60ace70de1ceadcf6e820c5
 
-pkgname = superslicer
+pkgname = superslicer-prerelease
 

PKGBUILD

@@ -1,9 +1,10 @@
 # Maintainer: Lukas1818 aur at lukas1818 dot de
 
-pkgname=superslicer
+pkgname=superslicer-prerelease 
 pkgver=2.3.55.5
 _pkgtag=$pkgver
 pkgrel=3
+epoch=1
 pkgdesc="G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)"
 arch=("$CARCH")
 url="https://github.com/supermerill/SuperSlicer"
@@ -11,6 +12,8 @@ license=('AGPL3')
 depends=('cgal' 'glew' 'nlopt' 'openvdb' 'wxgtk3-dev-opt' 'boost>=1.73.0' 'qhull>=2020.2-4')
 replaces=('slic3r++')
 makedepends=('cereal' 'cmake' 'eigen' 'libigl' 'openvdb' 'wxgtk2-dev-opt') # cmake doesn't detect wx if not both gtk2 and gtk3 are installed
+provides=("superslicer=$epoch:$pkgver")
+conflicts=('superslicer' 'superslicer-git')
 source=("https://github.com/supermerill//SuperSlicer/archive/$_pkgtag.tar.gz"
         "start-superslicer.sh"
         "0001-wxgtk3-is-broken-on-wayland.patch")