diff --git a/src/main.rs b/src/main.rs
index 906410e..9b1d7db 100644
--- a/src/main.rs
+++ b/src/main.rs
@@ -3,14 +3,10 @@
 #![feature(async_fn_track_caller, type_alias_impl_trait)]
 #![warn(rust_2018_idioms)]
 #![forbid(elided_lifetimes_in_paths, unsafe_code)]
-// STOP HIGHLIGHTING MY ENTIRE CODE RED YOU MOTHERFUCKING PEACE OF GARBAGE SOFTWARE
-// SOMETIMES I AM WRITING CODE BEFORE I INSERT A BREAK SOMEWHERE
-// ARE YOU AWARE THAT CODING DOESN'T PRODUCE FINISHED CODE IN A MILLISECOND???????
-#![allow(clippy::never_loop, unreachable_code)]
 
 mod static_mutex;
 
-use defmt::{info, println, unwrap};
+use defmt::*;
 use defmt_rtt as _;
 use embassy_executor::Spawner;
 use embassy_stm32::{
@@ -65,75 +61,43 @@ async fn query_time(mut pon: POn, mut tco: Tco, interval: Duration) {
 	loop {
 		pon.set_low();
 		info!("Waiting");
-
-		// we need to find the minute marker
-		// that means we won't receive a transmission for an entire second
-		tco.wait_for_rising_edge().await;
-		loop {
-			tco.wait_for_falling_edge().await;
-			let start = Instant::now();
-			tco.wait_for_rising_edge().await;
-			// our starting edge should have at least 800ms from the previous second,
-			// and then a full second.
-			if start.elapsed().as_millis() > 1500 {
-				break;
+		tco.wait_for_falling_edge().await;
+		// for _ in 0 .. 10 {
+		// 	info!("Receiving");
+		// 	let mut bytes = 0u64;
+		// 	for _ in 0 .. 60 {
+		// 		bytes = (bytes << 1) | (tco.is_low() as u64);
+		// 		Timer::after(Duration::from_millis(100)).await;
+		// 	}
+		// 	info!("DCF77: {:X}", bytes);
+		// }
+		let start = Instant::now();
+		let mut next = start;
+		for _ in 0 .. 120 {
+			let mut bytes = 0u16;
+			for _ in 0 .. 10 {
+				bytes = (bytes << 1) | (tco.is_low() as u16);
+				next += Duration::from_millis(100);
+				Timer::at(next).await;
 			}
-		}
-		let mut start = Instant::now();
-
-		info!("Receiving");
-
-		// we always start on the rising edge, with `start` set already
-		const SECONDS: usize = 60;
-		let mut bytes = [0u64; SECONDS];
-		let mut timing = [0u64; SECONDS];
-		let mut i = 0;
-		while i < SECONDS {
-			tco.wait_for_falling_edge().await;
-			bytes[i] = start.elapsed().as_millis();
-			tco.wait_for_rising_edge().await;
-			timing[i] = start.elapsed().as_millis();
-			start = Instant::now();
-
-			// verify that the transmission wasn't just noise of the previous one
-			if i > 0 && bytes[i] < 100 && timing[i - 1] - bytes[i - 1] < 100 {
-				bytes[i - 1] += timing[i - 1] + bytes[i];
-				timing[i - 1] += timing[i];
-			}
-			// and verify that the transmission wasn't a minute marker
-			else if timing[i] >= 1500 {
-				info!("Retrying");
-				i = 0;
-			}
-			// otherwise advance the second
-			else {
-				i += 1;
-			}
-		}
-
-		pon.set_high();
-		info!("Done");
-
-		let mut garbage = false;
-		for i in 0 .. SECONDS {
-			let data = match (bytes[i], timing[i]) {
-				(75 ..= 174, 900 ..= 1100) => "0",
-				(175 ..= 300, 900 ..= 1100) => "1",
-				_ => {
-					garbage = true;
-					"GARBAGE"
-				}
-			};
 			println!(
-				"Bit {:02}: on for {:04} ms of {:04} ms total -- {:02}: {}",
-				i, bytes[i], timing[i], i, data
+				"{}{}{}{}{}{}{}{}{}{} ({})",
+				(bytes >> 9) & 1,
+				(bytes >> 8) & 1,
+				(bytes >> 7) & 1,
+				(bytes >> 6) & 1,
+				(bytes >> 5) & 1,
+				(bytes >> 4) & 1,
+				(bytes >> 3) & 1,
+				(bytes >> 2) & 1,
+				(bytes >> 1) & 1,
+				bytes & 1,
+				start.elapsed().as_millis()
 			);
-			Timer::after(Duration::from_millis(50)).await;
 		}
+		pon.set_high();
 
-		if !garbage {
-			Timer::after(interval).await;
-		}
+		Timer::after(interval).await;
 	}
 }
 
@@ -144,7 +108,7 @@ async fn main(spawner: Spawner) {
 	let pon = Output::new(p.PA0, Level::High, Speed::Low);
 	let tco = ExtiInput::new(Input::new(p.PA1, Pull::None), p.EXTI1);
 
-	unwrap!(spawner.spawn(query_time(pon, tco, Duration::from_secs(120))));
+	unwrap!(spawner.spawn(query_time(pon, tco, Duration::from_secs(300))));
 
 	LED.init(Output::new(p.PA5, Level::Low, Speed::Low)).await;
 	let button = ExtiInput::new(Input::new(p.PC13, Pull::Up), p.EXTI13);